[ns] :help on interpretation of wireless trace file

Thu Aug 21 03:35:54 PDT 2008

  Dear ns-users,
can some one help me to interpret a wireless trace format like:
s 1.000000000 _0_ AGT  --- 0 pong 128 [0.00 0 0] ------- [0:0 -1:0 32 0]
r 1.000000000 _0_ RTR  --- 0 pong 128 [0.00 0 0] ------- [0:0 -1:0 32 0]
s 1.000000000 _0_ RTR  --- 0 pong 128 [0.00 0 0] ------- [0:0 -1:0 32 0]
s 1.000000000 _1_ AGT  --- 1 pong 128 [0.00 0 0] ------- [1:0 -1:0 32 0]
what is AGT what is RTR ..how will I know that my packet has been accepted  from the above trace..
Regard Srirupa


On Thu, 21 Aug 2008 ns-users-request at ISI.EDU wrote :
>Send Ns-users mailing list submissions to
> 	ns-users at isi.edu
>
>To subscribe or unsubscribe via the World Wide Web, visit
> 	http://mailman.isi.edu/mailman/listinfo/ns-users
>or, via email, send a message with subject or body 'help' to
> 	ns-users-request at isi.edu
>
>You can reach the person managing the list at
> 	ns-users-owner at isi.edu
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Ns-users digest..."
>
>
>Today's Topics:
>
>    1. Implemtation of switch contribute (amj ns2)
>    2. installation problem (.\install) [resent] (Nour)
>    3. General Procedure for static build?? (xing y)
>    4. Re: installation problem (.\install) [resent] (Mats Folke)
>    5. how i can adjust specific node address in wireless mac
>       (reza mohammadi)
>    6. Implementing a New Manet Unicast Routing Protocol in NS2
>       (Maurizio Bellemo)
>    7. Code for link level recovery of Base Station ( ????? )
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Wed, 20 Aug 2008 11:26:54 +0300
> From: "amj ns2" <amjedns2 at gmail.com>
>Subject: [ns] Implemtation of switch contribute
>To: ns-users at ISI.EDU
>Message-ID:
> 	<a72f6d010808200126x68ab3ca1vfd32da526c8191ea at mail.gmail.com>
>Content-Type: text/plain; charset="iso-8859-1"
>
>---------- Forwarded message ----------
> From: amj ns2 <amjedns2 at gmail.com>
>Date: Fri, Aug 15, 2008 at 12:13 PM
>Subject: Implemtation of switch contribute
>To: ns-users at isi.edu
>
>
>I have implemented  Switch In NS2 from some reference about how to fabric
>switch
>and then I implemented in ns2-31 i want contribute of my code of switch .
>thank you for help
>i prefered any contribute please send me in my email : amjedns2 at gmail.com
>and I thank anyone help me .
>thank you
>the files is attached in message
>
>------------------------------
>
>Message: 2
>Date: Wed, 20 Aug 2008 09:01:48 +0000 (GMT)
> From: Nour <ghali_noura at yahoo.fr>
>Subject: [ns] installation problem (.\install) [resent]
>To: ns-users at ISI.EDU
>Message-ID: <569377.5980.qm at web27908.mail.ukl.yahoo.com>
>Content-Type: text/plain; charset=utf-8
>
>
>
>
>
>----- Message d'origine ----
>De : Nour <ghali_noura at yahoo.fr>
>? : ns-users at isi.edu
>Envoy? le : Mercredi, 20 Ao?t 2008, 9h33mn 07s
>Objet : installation problem (.\install)
>
>
>Hello Everyone
>
>I tried to install NS [version 2.28] under windows. I followed all the instructions of how to install cygwin and how to extract NS files to a directory reachable from Cygwin.
>
>But when i write the command " .\install" in the shell, this message appears : " no such file or directory "
>
>Thank you for your help
>Nour81
>
>________________________________
>  Envoy? avec Yahoo! Mail.
>Une boite mail plus intelligente.
>
>
>       _____________________________________________________________________________
>Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr
>
>------------------------------
>
>Message: 3
>Date: Wed, 20 Aug 2008 15:20:38 +0530
> From: "xing y" <xingy2001 at gmail.com>
>Subject: [ns] General Procedure for static build??
>To: ns-users at ISI.EDU
>Message-ID:
> 	<6b44f2ff0808200250r4eb357eemc1a6c854eb9f5968 at mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1
>
>Subject: General Procedure for static build??
>To: ns-users at isi.edu
>
>
>Hi
>
>I am looking for a standard procedure for making a static ns build so that i
>can run the ns on any
>other linux machine with same configuration without installing the
>ns-allinone.
>
>I tried configure --enable-static and changing STATIC flag in Makefile.
>
>Please suggest a standard way of doing it.
>
>Thanks
>Xing.
>
>
>------------------------------
>
>Message: 4
>Date: Wed, 20 Aug 2008 12:27:31 +0200
> From: "Mats Folke" <mats.folke at ericsson.com>
>Subject: Re: [ns] installation problem (.\install) [resent]
>To: <ns-users at ISI.EDU>
>Message-ID:
> 	<7F641D42A7166F4FBB32DDC8E48B6F8FA9954A at esealmw114.eemea.ericsson.se>
>Content-Type: text/plain;	charset="iso-8859-1"
>
>Hi!
>
>Try "./install" not ".\install".
>
>Best wishes,
>Mats Folke
>
>Nour wrote:
> > ----- Message d'origine ----
> > De : Nour <ghali_noura at yahoo.fr>
> > ? : ns-users at isi.edu
> > Envoy? le : Mercredi, 20 Ao?t 2008, 9h33mn 07s
> > Objet : installation problem (.\install)
> >
> >
> > Hello Everyone
> >
> > I tried to install NS [version 2.28] under windows. I followed all
> > the instructions of how to install cygwin and how to extract NS files
> > to a directory reachable from Cygwin.
> >
> > But when i write the command " .\install" in the shell, this message
> > appears : " no such file or directory "
> >
> > Thank you for your help
> > Nour81
> >
> > ________________________________
> >  Envoy? avec Yahoo! Mail.
> > Une boite mail plus intelligente.
> >
> >
> >
> > _____________________________________________________________________________
> > Envoyez avec Yahoo! Mail. Une boite mail plus intelligente
> > http://mail.yahoo.fr
>
>
>
>--
>Mats Folke, M.Sc., Tech.lic
>Research Engineer
>
>Ericsson AB                     Office: +46 8 7571385
>Ericsson Research               Fax: +46 920 99621
>P.O. Box 920                    Mobile: +46 76 1271385
>SE-971 28 Lule?
>
>
>
>------------------------------
>
>Message: 5
>Date: Wed, 20 Aug 2008 05:35:39 -0700 (PDT)
> From: reza mohammadi <reza_mo1384 at yahoo.com>
>Subject: [ns] how i can adjust specific node address in wireless mac
>To: ns-users at ISI.EDU
>Message-ID: <860579.87219.qm at web33405.mail.mud.yahoo.com>
>Content-Type: text/plain; charset=us-ascii
>
>hello
>i design new mac protocol and i implement in wireless topology
>but in first packet sennding (RTS) destination address is -1 and -1 is=A0br=
>oadcast mac address. how i can send packet to specific node=20
>my output is shown below
>my simulation time is =A05=A0 minutes=A0 but in first packet sending below =
>result occure
>any body can help me?
>best regards
>hdr_src,,,,,,,,,,,,,src=0
>hdr_type
>hdr_dst ,,,,,,,,,, dts=-1
>hdr_src,,,,,,,,,,,,,src=0
>hdr_type
>hdr_dst ,,,,,,,,,, dts=-1
>ns: finish: X connection to :0.0 broken (explicit kill or server shutdown).
>
>
>
>
>
>------------------------------
>
>Message: 6
>Date: Wed, 20 Aug 2008 18:56:52 +0200
> From: "Maurizio Bellemo" <maurizio.bellemo at gmail.com>
>Subject: [ns] Implementing a New Manet Unicast Routing Protocol in NS2
>To: ns-users at ISI.EDU
>Message-ID:
> 	<7f432a2f0808200956w32b41859i1619abbc218f22eb at mail.gmail.com>
>Content-Type: text/plain; charset="iso-8859-1"
>
>Hi all,
>
>I'm trying to simulate a MANET in order to test an efficient flooding
>technique (broadcast). I took the code in this article, without using the
>routing part, because I don't need. I want only to flood the network with
>control information. I wrote a little simulation to test the algorithm. Two
>nodes flooding packets. The problem is I get a segmentation fault and I
>don't know why.
>I attach the simulation file and the algorithm of the article changed.
>
>Thank you a lot
>Best Regards
>Maurizio
>
>------------------------------
>
>Message: 7
>Date: Wed, 20 Aug 2008 23:13:40 +0530
> From: " ????? " <mandarchoure at gmail.com>
>Subject: [ns] Code for link level recovery of Base Station
>To: ns-users at ISI.EDU
>Message-ID:
> 	<e40e86ea0808201043q2b4ff208o833fc2f01301a2e3 at mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1
>
>Dear ns users,
>
>I am working on wired-cum-wireless scenario.
>In this i have to do link level recovery when packet is dropped between base
>station and wireless node.
>So, Please help me in this regard and send me the code for link level
>recovery for base station. and tell me in which file the code is there for
>base station in NS-2.29.
>I am very much thankful to you.
>
>Thanking You,
>
>Regards
>Mandar.
>
>
>------------------------------
>
>_______________________________________________
>Ns-users mailing list
>Ns-users at isi.edu
>http://mailman.isi.edu/mailman/listinfo/ns-users
>
>
>End of Ns-users Digest, Vol 56, Issue 17
>****************************************