[ns] Ns-users Digest, Vol 43, Issue 1
G Shafiullah
g.shafiullah at cqu.edu.au
Mon Jul 2 22:03:41 PDT 2007
Hi all,
I am a new user of NS-2. Can one please help me to install LEACH
Protocol in NS-2. I tried it with the following commands:
Add DMIT_uAMPS to the DEFINE list
Add -I./mit/rca -I./mit/uAMPS to the INCLUDE list Add the following just
prior to the line gaf/gaf.o \ mit/rca/energy.o mit/rca/rcagent.o \
mit/rca/rca-ll.o mit/rca/resource.o \ mac/mac-sensor-timers.o
mac/mac-sensor.o mit/uAMPS/bsagent.o \
Step 5.2 : Add the environmental variables to /etc/profile export
RCA_LIBRARY=$NS_HOME/ns-2.27/mit/rca
export uAMPS_LIBRARY=$NS_HOME/ns-2.27/mit/uAMPS
Step 5.3: source /etc/profile and clean up previous build source
/etc/profile make clean
But when I gave command make clean it prompts:
make: *** No rule to make target 'clean'. Stop
Please let me know the solutions. I am eagerly looking solution.
Thanks
GM
--------------------------------------------
G M Shafiullah
Master of Engineering (Research) Student
Centre for Railway Engineering (CRE)
Faculty of Sciences, Engineering and Health
Central Queensland University
Rockhampton, Qld 4702
AUSTRALIA
Phone: 61 7 4930 9313
Mobile:61 4 3208 5800
Email: g.shafiullah at cqu.edu.au, gmsbd at yahoo.com, gms at iwmbd.org
-----Original Message-----
From: ns-users-request at ISI.EDU [mailto:ns-users-request at ISI.EDU]
Sent: Monday, July 02, 2007 10:00 AM
To: ns-users at ISI.EDU
Subject: Ns-users Digest, Vol 43, Issue 1
Send Ns-users mailing list submissions to
ns-users at isi.edu
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.isi.edu/mailman/listinfo/ns-users
or, via email, send a message with subject or body 'help' to
ns-users-request at isi.edu
You can reach the person managing the list at
ns-users-owner at isi.edu
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Ns-users digest..."
Today's Topics:
1. Re: NIST - Bug?? (Venelin Petkov)
2. ns-2 FAQ (tomhend at u.washington.edu)
----------------------------------------------------------------------
Message: 1
Date: Sun, 1 Jul 2007 15:34:07 +0100 (BST)
From: Venelin Petkov <venelin_m_petkov at yahoo.co.uk>
Subject: Re: [ns] NIST - Bug??
To: Junkeira <tiago.junkeira at gmail.com>, ns-users at ISI.EDU
Message-ID: <977520.68050.qm at web27309.mail.ukl.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Hello Junkeira,
Thank you for your respond. I had tried the way you described below but
i again ran to the same error message:
$ ns wimax1.tcl
num_nodes is set 5
invalid command name "Mac/802_16/BS"
while executing
"Mac/802_16/BS create _o19 "
invoked from within
"catch "$className create $o $args" msg"
invoked from within
"if [catch "$className create $o $args" msg] { if [string match
"__FAILED_SHADOW_OBJECT_" $msg] { delete $o return ""
}
global errorInfo
error "class $..."
(procedure "new" line 3)
invoked from within
"new $mactype"
(procedure "_o14" line 10)
(Node/MobileNode add-interface line 10)
invoked from within
"$node add-interface $chan $propInstance_ $llType_ $macType_ $ifqType_
$ifqlen_ $phyType_ $antType_ $topoInstance_ $inerrProc_ $outerrProc_
$FECProc_"
(procedure "_o3" line 70)
(Simulator create-wireless-node line 70)
invoked from within
"_o3 create-wireless-node"
("eval" body line 1)
invoked from within
"eval $self create-wireless-node $args"
(procedure "_o3" line 23)
(Simulator node line 23)
invoked from within
"$ns node"
invoked from within
"set node_(0) [$ns node]"
(file "wimax1.tcl" line 208)
Do you have any idea how to fix this one? What is wrong with my values
аssigning?
#===================================
# Node
#===================================
$ns node-config -adhocRouting $val(rp) \
-llType $opt(ll) \
-macType Mac/802_16/BS \ ; # THIS IS THE FAILING ROW
-ifqType $opt(ifq) \
-ifqLen $opt(ifqlen) \
-antType $opt(ant) \
-propType $opt(prop) \
-phyType $opt(netif) \
-channel [new $opt(chan)] \
-topoInstance $topo \
-wiredRouting ON \
-agentTrace ON \
-routerTrace ON \
-macTrace ON \
-movementTrace OFF
#0?Node
set node_(0) [$ns node]
$node_(0) set X_ 536
$node_(0) set Y_ 668
$node_(0) set Z_ 0.0
$ns initial_node_pos $node_(0) 20
$ns node-config -macType Mac/802_16/SS \
-wiredRouting OFF \
-macTrace ON .
#1?Node
set node_(1) [$ns node]
$node_(1) set X_ 676
$node_(1) set Y_ 680
$node_(1) set Z_ 0.0
$ns initial_node_pos $node_(1) 20
I am currently using NS version 2.29 and the wimax module is the
embedded in it. I download this copy from here:
http://140.116.72.80/~smallko/ns2/ns-allinone-2.29_wimax.rar
I do not know whether this is from the version that i am using or
anything else that is why all help will be very appreciated.
I am looking forward to hearing from you.
Thank you in advance.
Best Regards,
Venelin Petkov
Junkeira <tiago.junkeira at gmail.com> wrote:
Hi,
I didnt see the message, it wasnt sent to my mail, so i'll answer just
now.
Why you dont config like in the example datarate.tcl, first all the
options
for the configuration of the wireless node that will after be created,
and
then just change the different parameters for the MN or SS. If you can
run
that example without receiving an error message is because your sintax
is
not correct probably. But also probably you already solved that
problem:).
kindly, Tiago Junqueira
$ns node-config -adhocRouting $opt(adhocRouting) \
-llType $opt(ll) \
-macType Mac/802_16/BS \
-ifqType $opt(ifq) \
-ifqLen $opt(ifqlen) \
-antType $opt(ant) \
-propType $opt(prop) \
-phyType $opt(netif) \
-channel [new $opt(chan)] \
-topoInstance $topo \
-wiredRouting ON \
-agentTrace ON \
-routerTrace ON \
-macTrace ON \
-movementTrace OFF
#puts "Configuration of base station"
set bstation [$ns node 1.0.0]
$ns node-config -macType Mac/802_16/SS \
-wiredRouting OFF \
-macTrace ON ;# Mobile nodes cannot do routing.
set wl_node [$ns node 1.0.1] ;# create the node with given @.
--
View this message in context:
http://www.nabble.com/NIST---Bug---tf3849528.html#a11368605
Sent from the ns-users mailing list archive at Nabble.com.
---------------------------------
Yahoo! Mail now has unlimited storage, which means you can have spam
control and more space for those important e-mails.
------------------------------
Message: 2
Date: Sun, 1 Jul 2007 15:20:10 -0700
From: tomhend at u.washington.edu
Subject: [ns] ns-2 FAQ
To: ns-users at ISI.EDU
Message-ID:
<200707012220.l61MKAe1010795 at ns-regression.ee.washington.edu>
The Network Simulator ns-2: Frequently Asked Questions
Note: This FAQ is now available at the project wiki:
http://nsnam.isi.edu/nsnam/index.php/Ns_Users_FAQ
_The mailing is is now subscriber only---please see the FAQ entry on
"How do I post to the mailing list? Why was my post rejected?" for
details._
* _Where do I get ns?_
From the ns web site at http://www.isi.edu/nsnam/ns/ns.html and
the download page http://www.isi.edu/nsnam/ns/ns-tests.html.
* _What platforms does ns run on and what kind of hardware do I
need?_
Please see "where to start" on the building ns web page:
http://www.isi.edu/nsnam/ns/ns-build.html#start.
* _What should I do if I have trouble downloading/extracting ns?_
This question is answered in detail at
http://www.isi.edu/nsnam/ns/ns-problems.html#downloading.
* _What should I do if I encounter problems building ns?_
Check:
1. the README that comes in the distribution (very brief),
2. the "installation problems, bug fixes and help" web page
http://www.isi.edu/nsnam/ns/ns-problems.html,
3. the archives of the ns-users mailing list
http://www.isi.edu/nsnam/ns/ns-lists.html,
4. post a bug report (see below)
http://www.isi.edu/cgi-bin/nsnam/reportbug.cgi.
* _What do I do after I successfully build ns?_
+ Put the path to your ns executable into your PATH
environment
+ Put the path to your otcl into your LD_LIBRARY_PATH
environment
+ Put the path to your tcl library into your TCL_LIBRARY
environment
* _Where can I find documentation for ns?_
All documentation is linked from the main ns web page
http://www.isi.edu/nsnam/ns/. Documentation includes a tutorial
(originally from Marc Greis) and a reference manual (ns notes and
documentation).
* _Words, words, words... that documentation is nice, but where are
some sample scripts I can start from?_
Many sample scripts can be found in the ns distribution in
~ns-2/tcl/ex and ~ns-2/tcl/test.
* _What protocols does ns support?_
A lot! Almost all variants of TCP, several forms of multicast,
wired networking, several ad hoc routing protocols and
propagation
models (but not cellular phones), data diffusion, satellite, and
other stuff. See the documentation (described above) for details,
or download ns and look.
* _How do I know that ns correctly implements these protocols?_
Ns has validation tests that cover many protocols, see
http://www.isi.edu/nsnam/ns/ns-tests.html. However, ultimately
users are responsible for verifying that ns is accurate for their
purposes---since we cannot foresee all the ways ns may be used,
we
cannot test all cases with all inputs.
* _Are there any contributed/additional protocols not in the main
distribution?_
Yes, please see the contributed code web page
http://www.isi.edu/nsnam/ns/ns-contributed.html. The mailing list
archives can also be helpful (see below).
* _How should I get started doing something (like implementing a
new
protocol or trying an experiment)?_
We recommend that you look through the tutorial (see
documentation, above), then start with an example program that is
most similar to yours (in the tutorial, or in tcl/ex or tcl/test
in the distribution), and then start changing things.
* _What should I do to compile ns to reflect my changes if I've
modified some .cc or .h files?_
go to ns directory and run "make" or "make depend; make"
* _How do I subscribe to the ns-users mailing list? How do I search
old list archives? I can't take any more---how do I get off this
list?_
To subscribe or unsubscribe, see
http://www.isi.edu/nsnam/ns/ns-lists.html. The list archive is at
http://www.isi.edu/nsnam/ns/ns-lists.html.
* _How do I post to the mailing list? Why was my post rejected?_
As of June 2004 the ns-users lists allow posts from _subscriber
only_. If you're not a subscriber, your posts to the list will be
rejected. (This is unfortunately necessary to dispose efficiently
of spam; manual filtering is too expensive.) We realize that the
list is high traffic, so if you wish to post to the list without
receiving messages on it, please subscribe and select the
_no-mail_
option for your subscription.
For details about the mailing list including mailing-list
specific
FAQ (for example, what if you're subscribed but still can't
post),
please see http://www.isi.edu/nsnam/ns/ns-lists.html.
* _Did my post appear on the mailing list? (Or, why didn't my post
appear on the mailing list?)_
See the http://www.isi.edu/nsnam/ns/ns-lists.html web page for
help debugging mailing list problems.
* _What if I have a question that's not answered here?_
If you've checked the installation problems and bug fixes web
page
(http://www.isi.edu/nsnam/ns/ns-problems.html) and there's no
answer to your question, you may want to file a bug report or
post
a question to the ns-user's mailing list.
First, you should check the archive of the list at
http://www.isi.edu/nsnam/ns/ns-lists.html. Your question may
already be answered there.
If not, you can post a bug report using the web form at
http://www.isi.edu/cgi-bin/nsnam/reportbug.cgi.
If your question is NOT about ns implementation bugs, you may
wish
to post to the list. First you should subscribe. Subscription
instructions are at http://www.isi.edu/nsnam/ns/ns-lists.html.
_Please note that mail sent to the list is publicly distributed
and archived. _If you have concerns about your message being made
public (spam harvesting of your address), please consider that
_before_ posting. We cannot remove messages from reciepient's
mailboxes or the public archive after they're posted.
When posting bug reports, please _always_ include information
including at least (the bug report form includes spaces for
these):
+ what version of ns you're using,
+ what operating system you're running on (not just Linux or
Solaris, but RedHat version 7.0 or Solaris 2.4---send us the
output of "uname -a"),
+ what specific behavior you see (if ns doesn't compile,
what's
the specific error; if TCP does something strange, what
exactly did it do [send a pointer to a packet trace]),
+ what behavior you expected to see (if ns doesn't compile
this
is obvious, but if TCP does something strange, why is it
strange, where is the TCP spec violated?),
+ pointers to your script detailed output files,
+ a statement that "yes, I've read the FAQ, ns-problems page,
and manual and I couldn't find the answer there" (or a
statement about why you didn't do that yet :-)
Soo-Hyun Choi observed from posts to the list: _Sometimes, I see
this list is filled with the questions with: 1) asked many times
before 2) hardly understandable what this guy is asking 3) too
easy to find an answer over a few clicks over the Internet 4)
soliciting to do their homework in a simple way by asking in this
list 5) easily seekable an answer by contributing a couple of
hours of reading the ns-manual 6) etc, etc. _
_As many of us in this list are doing an advanced degree, it
would
be suggested to read the following article in order to raise a
useful/meaningful question in a smart way.
http://www.catb.org/~esr/faqs/smart-questions.html _
This is _very_ good advice, since asking the Right Question is
very likely to get a good/helpful answer, while asking a question
poorly. For example, think about how you would answer these two
questions: _"Ns doesn't work for me, it crashes. Help."_ as
compared to _"I get a segmentation fault when running test script
test-suite-webcache on Mandrake 10 Linux. The backtrace is on my
web page at www.someu.edu/~someone. It looks like it passes in
the
on-line test suites, but it fails for me. Am I doing something
wrong?_
A reminder about mailing list etiquette:
+ Please check the web pages and list archives before posting
your question.
+ Please keep the body of your post to simple ASCII, not HTML.
+ Please do _not_ send large attachments (if what you have is
bigger than a few kilobytes, put it on a web page and send a
URL)
+ Before posting a question like "did people see my post" or
"the list seems down", please check the archives (you can
answer this question more accurately by checking yourself
rather than asking).
+ Please don't post subscribe/unsubscribe requests directly to
the list, use the lists' information page. (see the web page
mentioned above for details).
------------------------------
_______________________________________________
Ns-users mailing list
Ns-users at isi.edu
http://mailman.isi.edu/mailman/listinfo/ns-users
End of Ns-users Digest, Vol 43, Issue 1
***************************************
More information about the Ns-users
mailing list