[ns] setting the radio and sensing ranges of a sensor node

[Andrea M]

Hi, if you want to set the radius of a node look also at this:
http://mailman.isi.edu/pipermail/ns-users/2001-June/015908.html

bye


2006/6/25, Miguel Sepulcre <miguel_sepulcre at yahoo.es>:
>
>
> The basic procedure to 'set' the communication range is detailed in the ns
> manual: http://www.isi.edu/nsnam/ns/doc/node221.html (an example can be
> found here http://140.116.72.80/~smallko/ns2/range_en.htm).
>
> The sensing range can be similarly adjusted with:
> Phy/WirelessPhy set CSThresh_ <value>Hope this helps
>
> Regards
>
> Miguel
>
>
>
>
>
>
> ----- Original Message -----
> From: "Alper BEREKETLI" <balper at metu.edu.tr>
> To: <ns-users at ISI.EDU>
> Sent: Saturday, June 24, 2006 5:15 PM
> Subject: [ns] setting the radio and sensing ranges of a sensor node
>
>
> >
> > Hi all,
> >
> > I am performing some simulations on wireless sensor networks and would
> > like to know how I can set and use the "radio communication" and
> > "sensing" ranges of a sensor node... Where can I find the sensing
> > range of a wireless node so that I can calculate the coverage of an
> > event region?
> >
> > I would appreciate any help. Thanks in advance.
> >
> >
> > Alper BEREKETLI
> > Research & Teaching Assistant
> > Middle East Technical University
> > Department of Electrical and Electronics Engineering
> > E-Mail: balper at metu.edu.tr, balper at eee.metu.edu.tr
> > Office: EA404, Phone: (+90 312) 210 44 25
> > Lab: D123, Phone: (+90 312) 210 45 74
> >
> >
>
>
>
>
> ______________________________________________
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y móviles desde 1 céntimo por minuto.
> http://es.voice.yahoo.com
>
>