[ns] the whole ns process in a simple simulation

[Liuhai]

hi,Joshua Robinson

	  I have another question since you mentioned you have been doing between LL and the channel, could you tell me, if I want to let packets from dsr layer directly to mac layer, will ns work well? 
	Because I want to simulte my mac protocol, so I dont need other layers

======= 2004-02-09 04:01:00 ÄúÔÚÀ´ÐÅÖÐдµÀ£º=======

>Sounds like you have a pretty good idea of what's going on.  Don't forget
>udp.cc where part of the packet creation occurs.  Although I don't know
>exactly how this works, I can tell you that node has a classifier
>associated with it - and this is what takes the packet from the agent and
>delivers it to the routing protocol.  If you have any further questions
>about what happens between the LL and the channel, I can help you out -
>that's where I've been playing around :)
>
>hope this helps,
>Joshua
>
>On Mon, 9 Feb 2004, Liuhai wrote:
>
>>
>> hi all
>>
>> 	I am not very clear with the whole process in a simple wireless simulation, we can use a the following simulation as our example:
>>
>> set val(chan)           Channel/WirelessChannel    ;# channel type
>> set val(prop)           Propagation/TwoRayGround   ;# radio-propagation model
>> set val(netif)          Phy/WirelessPhy            ;# network interface type
>> set val(mac)            Mac/802_11                 ;# MAC type
>> set val(ifq)            Queue/DropTail/PriQueue    ;# interface queue type
>> set val(ll)             LL                         ;# link layer type
>> set val(rp)             DSR                        ;# routing protocol
>>
>>
>> 	the above is the main parameter of simulation, and agent layer is
>> CBR + UDP. And I want to know the whole process from a packet's creation
>> to reaching the destination.
>>
>> 	As my understanding, the cbr packet is created in the file
>> agent.{h,cc} and cbr_traffic.cc, but I dont know how it get to the
>> dsragent.cc, then it flow from dsr to LL, then to IFQ then to Mac, then
>> wirelessPhy, and last to the channel. am i right???
>>
>> hope you can help, thanks in advance
>>
>>
>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ÖÂ
>> Àñ£¡
>>
>>
>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Liuhai
>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡lhmyn at 163.com
>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2004-02-09
>>
>>
>>
>>
>>
>
>.

= = = = = = = = = = = = = = = = = = = =
			

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ÖÂ
Àñ£¡
 
				 
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Liuhai
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡lhmyn at 163.com
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2004-02-10